Juliet Beanie: Free Crochet Beanie Pattern with Velvet Yarn

by Shehla Ahmed

My love affair with velvet yarn continues this week with a new crochet beanie pattern! Last week, I shared the pattern for my Tempest Beanie, a velvet dream of bobbles. Because velvet yarn really works so well with textures and raised stitches, I wanted to make something that felt a little more refined with my second crochet beanie pattern with this yarn. The Juliet beanie is a ribbed crochet beanie that has raised edges that catch the light and all the softness and squishiness of velvet yarn in a super simple pattern. Let’s get started!



Bernat Velvet Yarn


Just like with the Tempest beanie, I used Bernat velvet yarn to make this. This time I chose the color Burgundy Plum, a rich deep jewel tone that’s more burgundy than plum. It’s labeled as a bulky weight polyester but it feels more like worsted weight, which is great because that’s what I like working with better. The velvet texture of this yarn comes from the strands of fiber that come off a central string, but it doesn’t shed! Let me say that again – no shedding!!  From super soft, light colors like this blue to deep, rich jewel tones. Check them all out at JoAnn’s here. I’ve noticed different colors at different locations so if you don’t see the one you want, try another store or the Yarnspirations website!



For this crochet beanie pattern, I used my favorite way to create a ribbed texture, and instead of using it just for the bottom part of the beanie, I used it for the body too. This made it much easier for me to see where the stitches should go and where I was placing my hook. With all the velvety threads, it can be tricky to see where to insert your hook and you need to feel around for the spaces. So, I avoided that altogether and used post stitches to create a defined rib texture.


Related: The Tempest Beanie Crochet Pattern


The full free pattern is written out below. For those who’d prefer to print the pattern and take it with you for on-the-go and to markup as you go, you can buy the inexpensive printable PDF from my Etsy and Ravelry shops. The PDF is formatted without ads or comments, so it’s easy to read.




Buy the printable PDF on Etsy.

Buy the printable PDF on Ravelry.








Pattern Notes:

  • Skill level: Beginner
  • Sizing: Small/medium (21″ circumference) – you can adjust this to any size!
  • Gauge: 3 sts/inch x 3 rows/inch



Juliet Free Crochet Beanie Pattern



I used front post and back post double crochets for this beanie and for the ribbings for most of my beanies, so I have a video tutorial for that below! The pattern uses this throughout, so if you get stuck, take a look at the video to see how to FPDC and BPDC to get the ribbed look. If the video isn’t showing below, disable adblock for it to load!


Round 1: Chain 4. Work 52 foundation double crochet, and do not count the original chain as a DC. To work a FDC, yarn over and insert your hook into the first chain you made. YO and pull through just one loop. This creates a chain. Then, yarn over and complete the DC as normal. Once you have 52 FDC, slip stitch to the top of the chain to begin working in the round and place a stitch marker.


If you want to make this beanie larger or smaller, work the number of FDC you need to get your hat circumference. You can check the sizes in this free hat sizing guide!


The Ultimate Guide to Sizing Hats



Rounds 2-21: Working in continuous rounds *FPDC, BPDC* around until the beanie measures 9 inches tall. You can also use the sizing guide above to make it a custom hat height.



Round 22: *Insert your hook around the next stitch and pull up a loop. Then insert your hook around the next stitch and pull up a loop. YO and finish as a DC.* Repeat this all around the beanie to decrease your stitches to 26.

Round 23: FPDC around.

Round 24: Repeat round 22 round to decrease your stitches to 13.

To finish this crochet beanie pattern, cut the yarn with a few inches of tail, and thread the tail end through a tapestry needle. Bring the needle under the front loops of each of the last 13 stitches and pull to close the top of the beanie. Secure with a knot and weave in the ends. Trim any excess yarn.


And you’re done!



This beanie is super easy to work and you’re really just alternating between FPDC and BPDC to create the ribbed texture. If you want a little more help with that, you can check out my post on how I create stretchy crocheted ribbings for all my beanies and then just use that for the entire thing.


Related: How to Make the Perfect Stretchy Crochet Ribbing



I love how classic and pretty this crochet beanie pattern turned out. I couldn’t decide whether to add a pom or not, so I attached mine loosely so I could remove it if I changed my mind, but I think I like it better with it. Let me know what you guys think in the comments below!


If you liked this pattern and want to get more free patterns and freebies delivered right to your inbox every week, fill out the box below to subscribe to the weekly newsletters! You’ll get all the free patterns, tips, and more, along with access to the subscriber-only resource library full of goodies. Thanks so much for reading!


See you soon šŸ™‚


Visit my pattern shops on Ravelry, Craftsy, and Etsy to buy the printable PDFs of all my patterns. They’re ad-free, comment-free and your support helps me run The Blue Elephants so I can continue publishing free patterns here. 

My material lists sometimes include affiliate links (denoted with a *) for which I earn a small commission at no extra cost to you. I only link to products I personally use, love, and recommend. You can read more about this in my Disclosure. 

I worked hard on this pattern, so please be respectful and do not sell or redistribute this pattern as your own. If you sell finished items made using this pattern, credit The Blue Elephants as the designer and link back to the blog post or the Etsy pattern link. For any other questions, read my Terms of Use or contact me


You may also like

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.


merry stone January 1, 2020 - 1:52 pm

The instructions indicate a starting ch of 4 for the ribbing…your video shows 3. The video should show how to construct the hat , especially how to join the rows . Its confusing to me if you always work from the front side or turn the garment inside out every other row? Do you chain 2 each row? Does this count as a stitch? Does this make a noticeable seam?

Shehla Ahmed January 5, 2020 - 10:29 am

Hi Merry,

The video is meant to show you how to do the ribbing, which I use in most of my beanies. For this pattern, I adjusted that method a little bit. The beanie is worked in continuous rounds, meaning you work the first stitch of the round in the space of the last stitch of the previous round, so there’s no seam. Because you’re working in rounds, that also means you’ll be working with the right side facing you the whole time.

I hope that clears it up!

Em November 24, 2019 - 2:29 pm

This pattern is causing me a lot of frustration. I cannot figure out how to make the beanie connect after the first row of foundation double crochets. the slip stitch only attaches the top, but the bottom is chillin and open. I’ve wasted a lot of yarn using this pattern and I am really hoping that someone can give me some guidance so I can continue. The pattern makes sense and if I can get past this one bump I will be good to go! I love the way you write patterns, and your foundation dc is such a cool trick!

Shehla Ahmed November 24, 2019 - 5:05 pm

Hi Em!

To secure that little bit at the end, I just use the starting tail and sew it to the other end with a tapestry needle when I weave in all the ends. I hope that helps.

Thanks so much!

Julie February 10, 2019 - 4:59 am

Gorgeous! This style of hat works so well in that lovely velvet yarn.