There’s something about a hexagon that feels so modern and fresh. It’s all the perfect angles and edges, I think. Recently, I had a custom order request from a lady who wanted something modern and colorful for her little boy, and I immediately thought, “Hexagons!”
This is the Hudson Blanket, a super easy crochet baby blanket pattern that has just the right pop of color. The entire blanket is made up using a simple hexagon pattern and then it’s seamed together. I also added a fleece lining to add some weight to the blanket and finished it all off with the most fun bobble border you’ve ever seen!
If you get tired or frustrated with creating a blanket in rows and turning the whole thing around, you’re going to love this pattern. The Hudson blanket is just a bunch of different hexagons in different colors and they’re each made separately. It’s much faster and easier to whip up a stack of smaller shapes than to work on a large blanket. Once all the hexies were made, all I had to do was seam them all together. That step does take a bit longer, but it’s an easy task to do and goes by quickly.
Related: How to Customize Crochet Blanket Sizes
I also created a few half hexagons so that two of the side would be straight. To make the blanket weighted and add a little bit more softness to it, I decided to line it with fleece. I also added a bobble border all the way around to finished it all off and give little fingers something to grab onto. Don’t you love how it turned out with that multi yarn?
The full free pattern is written out below. For those who’d prefer to print the pattern and take it with you for on-the-go and to markup as you go, you can buy the inexpensive printable PDF from my Etsy and Ravelry shops. The PDF is formatted without ads or comments, so it’s easy to read.
- 8 skeins of #4 worsted weight yarn – I used 2 each in I Love This Yarn in Greybeard (Color A), Turquoise (Color B), White (Color C) and Aegean Stripe (Color D) for the border.
- 1.5 yards of no-pill fleece
- 4.00mm crochet hook*
- a rotary cutter with skip stitch blades*
- tapestry needle
* denotes affiliate link
- ch – chain
- SC – single crochet
- DC – double crochet
- sl – slip stitch
- Skill level: Beginner/intermediate
- Sizing: 40 x 40 inches
- Gauge: 4S x 2R per inch
Hudson Modern Hexagon Blanket Pattern
For the hexagons and half hexagons, I’ve written out the full pattern below. I’ve also done another post that goes more into detail on how to crochet hexagons and there’s a video tutorial too.
Make 20 of these in Color A (Greybeard), 16 in Color B (Turquoise), and 16 in Color C (White).
Round 1: Start with a magic loop and secure it with a slip stitch. Chain 2 (count as DC). Work 1 DC into the magic loop. Chain 2 again. *DC 2, chain 2* five more times into the magic loop. You should have 6 sets of DC and 5 chain-2 spaces now. Slip stitch to the top of the ch 2 to finish the round. Then, pull the loop closed.
Round 2: Ch 2, DC. (DC, ch 2, DC) into the chain-2 space. *DC 2, [DC, ch2, DC]* repeat around and slip stitch to the top of the beginning ch 2.
Round 3: Chain 2, DC 2. (DC, ch 2, DC) into the chain-2 space. *DC 4, [DC, ch2, DC]* repeat around to the last ch-2 space. DC 1 and slip stitch to the top of the beginning ch 2. (6 DC per side).
Round 4: Chain 2, DC 3. (DC, ch 2, DC) into the chain-2 space. *DC 6, [DC, ch2, DC]* repeat around to the last ch-2 space. DC 2 and slip stitch to the top of the beginning ch 2. (8 DC per side).
Round 5: Chain 2, DC 4. (DC, ch 2, DC) into the chain-2 space. *DC 8, [DC, ch2, DC]* repeat around to the last ch-2 space. DC 3 and slip stitch to the top of the beginning ch 2. (10 DC per side).
Round 6: Chain 2, DC 5. (DC, ch 2, DC) into the chain-2 space. *DC 10, [DC, ch2, DC]* repeat around to the last ch-2 space. DC 4 and slip stitch to the top of the beginning ch 2. (12 DC per side).
Make 4 in Color B (Turquoise) and 4 in Color C (White)
Round 1: Start with a magic loop and secure it with a slip stitch. Chain 2 (count as DC). Work 1 DC. Ch 2, *DC 2, ch 2* twice more. Pull the tail ends to close the loop. You should have 3 sets of DC and 2 chain-2 spaces now.
Round 2: Chain 2, turn. *DC 2, then (DC, ch 2, DC) into the ch-2 space* twice. DC 2, increase. (4 DCs per side)
Round 3: Chain 2, turn. .*DC 4, then (DC, ch 2, DC) into the ch-2 space* twice. DC 3, increase. (6 DCs per side)
Round 4: Chain 2, turn. *DC 6, then (DC, ch 2, DC) into the ch-2 space* twice. DC 4, increase. (8 DCs per side)
Round 5: Chain 2, turn. *DC 8, then (DC, ch 2, DC) into the ch-2 space* twice. DC 5, increase. (10 DCs per side)
Round 6: Chain 2, turn. .*DC 10, then (DC, ch 2, DC) into the ch-2 space* twice. DC 6, increase. (12 DCs)
Seaming It All Together
Once you have all of the hexagons, it’s time to arrange them in the pattern you want and sew it all together. For my blanket, this is the pattern I followed.
ROW 1: Gray, turquoise, white, gray, turquoise, white, gray
ROW 2: Turquoise (half), white, gray, turquoise, white, gray, turquoise, white (half)
Repeat these rows three more times to finish. Then, thread your tapestry needle with a long length of yarn and use the invisible seam method to attach each hexagon to the one next to it. I did all of the short sides first so that I had long rows of hexagons, and then I went back and sewed the rows together. It’s sort of like piecing together a quilt.
It does take a while to do, but it’s easy and you just need to spend some time on it. I hate seaming, but the effect is so neat that I really do think it’s worth it! Weave in the tail ends.
Blocking, Adding Fleece, and the Border
For me, the best part of this hexagon baby blanket (and most of the baby blankets I make) is the fleece lining. It adds weight to the blanket and stays on the baby when they move around, and it has a comforting presence. It also makes the blanket much softer and warmer. However, if you don’t want to add the fleece, you can go ahead and skip to the section on adding the border.
Related: All About Blocking Crochet and Knits
Before adding the fleece, lightly block the blanket so that all the hexagons are as they should be. They might have gotten a little out of shape if you sewed them too tightly together or a little unevenly. But a simple blocking will fix that and make sure that two of the edges are straight. I have blocking mats now that help me align the edge but if you don’t, a couple of towels works well too.
If you need help learning how to block items or a list of tools I like using for this, check out the post above all about blocking!
Prepping the fleece
On a large surface, lay out your fleece and smooth it out. Then, lay your blanket on top of it, matching up two of the edges. Smooth it out and make sure it all lines up. Using a pair of sharp scissors, cut the fleece to a little bigger than the size of the blanket. Make sure not to cut the yarn!
Remove the blanket for now and let’s just work with the fleece. This is where we’ll make the holes into the edges of the fleece so that we can insert our hook into it to crochet the fleece and blanket together. Put a cutting mat or a piece of cardboard under the edge of the fleece to protect your surface and bring a ruler about a quarter inch away from the edge of the fleece.
Then, run your skip stitch down the side of the ruler. The skip stitch is the same as a rotary blade, but it perforates as it cuts into the fleece, rather than cutting a straight line. Work down all four sides of the fleece so that you have small slits along each side.
Now let’s secure the fleece to the blanket!
Bring the blanket back to the fleece and line up the first corner. With your crochet hook, attach yarn in the border color (Color D). Work 1 SC in the corner of the blanket. Then, SC down the side going through the spaces in the crocheted blanket and the slits made in the fleece. At the corner, ch 1, rotate the blanket, and work down the next side. This round gives you the first round of your border and attaches the fleece to the blanket.
Work one more round of SC around the blanket, making sure to ch 1 before turning the corners.
The Bobble Border
1. Chain 5 at the corner of the blanket.
2. Into the 2nd chain from the hook, work 1 HDC but only pull the yarn through the first two loops. You’ll have two loops remaining on the hook. Work 3 more HDC the same way, being sure to only pull through the first two loops each time.
3. You should now have 5 loops on the hook. YO, and pull through all 5 loops.
4. Slip stitch into the same space to finish off the bobble.
5. Slip stitch twice into the next two chain spaces.
6. SC into each of the next two SC spaces. Repeat steps 1-6 all around the blanket and bind off.
Related: How to Crochet Bobbles, Step-by-Step Pictures
You can also see the step-by-step images for a bobble border like this in another blanket pattern I have on the blog. It’s a simple blanket with this same border technique. Just scroll down to see the pictures walking you through how to do the border.
And you’re done!
Weave in any loose ends and trim the excess yarn, and you’re done with the Hudson blanket! I love the way this modern hexagon blanket turned out and my customer loved it too! She says her son carries it around with him and holds onto the bobbles, which is exactly what I wanted. Look at him all snug and “reading” his book 😀
I hope you guys love the Hudson Blanket as much as we do! If you would like to see more free patterns delivered to your inbox every week, sign up for the newsletter using the box below. You’ll also get access to the subscriber-only resource library with cheatsheets, sizing guides, and more! Just fill out your and email in the box below and you’re good to go.
See you soon 🙂
Visit my pattern shops on Ravelry, Craftsy, and Etsy to buy the printable PDFs of all my patterns. They're ad-free, comment-free and your support helps me run The Blue Elephants so I can continue publishing free patterns here.
My material lists sometimes include affiliate links (denoted with a *) for which I earn a small commission at no extra cost to you. I only link to products I personally use, love, and recommend. You can read more about this in my Disclosure.
Friday 10th of June 2022
Thank you so much for sharing- I love this blanket and have puzzled over how to line a blanket with fleece so that was very helpful.
Saturday 31st of July 2021
How do you do the Invisible seam method? I love your blog and read it completely every time you post. Thank you in advance.
Sunday 1st of August 2021
Hi! I don't have my own tutorial up for this method, but this is the one I used to figure it out. https://www.youtube.com/watch?v=9TqgRdkJpqs Hope it helps!
Sunday 25th of April 2021
Do you have the link to the video? I learn better with visuals.
Saturday 10th of April 2021
Hi, I am wondering how washable this blanket is? Hoping it will last for years and years and washability is key. Thanks! And beautiful blanket!
Saturday 28th of November 2020
I have a question about the directions. Why are some stitches in parentheses? I don’t know what that means. Can you help me out? I understand the asterisks, but not The parenthesis.
Saturday 28th of November 2020
Hi! The directions in the parenthesis are to be treated as one step in one stitch. So where is says (DC, ch 2, DC) into the ch-2 space .... you would be working everything in he parenthesis into the ch-2 space. I hope that clears it up!